|
AC outdoor magnetic transformer driver 200w 12v black steel outdoor housing for use with lighting rope light or order lighting systems
Transformer
Input leads are 18 AWG. Output leads are 12 AWG. Lead insulation is 105 °C.
The transformer uses a class B 130 °C insulation system.
Enclosure
Enclosure temperature will not exceed 70 °C @ 40 °C ambient.
Wiring compartment has 2 knockouts sized for 3/4 inch screw cable connectors.
The removable cover for the wiring compartment is secured in place by clips.
The enclosure is black powder coated.
General
• Manual reset thermal circuit breaker on the secondary side.
• Dimmable with all dimmers that provide a symmetrical form
of current wave under any conditions.
• UL listed file # E300404
• UL standard 5085-1
• ETL listed
• CSA listed
• NEMA 3R enclosure
Spec:
Max Load 200 W
Input Voltage 120 V 60 Hz
Output Voltage Full Load 11.5 V min. 12.5 V min. Boost
Input Current Full Load 1.66 A
Open Circuit Volts 12.5 V. 13.5 V Boost
Open Circuit Current 0.3 A
Output Current Full Load 12.5 A max
Efficiency 91.50%
Coil Former Double Section Bobbin
Thermal Class B 130 °C
Leads Primary PVC 600 V #18
Leads Secondary PVC 300 V #12
M200SOD
Dimensions in inches:
Height 9.17"
Width 3.06"
Depth 2.94"
|
