DC Output Magnetic 90W 12V - LED transformer driver
DC indoor magnetic transformer driver 90w 12v black steel, indoor housing for use with LED Strip lighting, LED rope light or order LED systems.
Input leads are 18 AWG. Output leads are 12 AWG. Lead insulation is 105 °C.
The transformer uses a class B 130 °C insulation system.
Enclosure temperature will not exceed 70 °C @ 40 °C ambient.
Wiring compartment has 2 knockouts sized for 3/4 inch screw cable connectors.
The removable cover for the wiring compartment is secured in place by a screw.
The enclosure is black powder coated.
• Manual reset thermal circuit breaker on the secondary side.
• Controlled with a low-voltage dimmer.
• ETL listed
• CSA listed
• UL standard 5085-1
• NEMA 3R enclosure
Maximum Load 150 W
Input Voltage 120 V 60 Hz
Output Voltage Full Load 11.5 VDC
Input Current Full Load 1240 mA
Open Circuit Volts 12.5 VDC
Output Current Full Load 12.35 A
Coil Former Double Section Bobbin
Thermal Class B 130 °C
Leads Primary PVC 600 V #20
Leads Secondary PVC 300 V #14
Class 2 Dimmable LED DC Magnetic Transformer
Dimensions in inches: