DC Output Magnetic 40W 12V - LED transformer driver
DC indoor magnetic transformer driver 40w 12v black steel, housing for use with LED Strip lighting, LED rope light or order LED systems.
The actual transformer is encapsulated in the enclosure.
Input leads are 20 AWG. Output leads are 16 AWG. Lead insulation is 105 °C.
Enclosure temperature will not exceed 70 °C @ 40 °C ambient.
Wiring compartment has 2 knockouts sized for 3/4 inch screw cable connectors.
The removable cover for the wiring compartment is secured in place by a screw.
The enclosure is black powder coated.
• Manual reset thermal circuit breaker on the secondary side.
• Controlled with a low-voltage dimmer.
• ETL listed
• CSA listed
• UL standard 5085-1
Max Load 40 W
Input Voltage 120 V 60 Hz
Output Voltage Full Load 11.4 V
Input Current Full Load 360 mA
Open Circuit Volts 12.5 VDC
Output Current Full Load 3.19 A
Coil Former Double Section Bobbin
Thermal Class B 130 °C
Leads Primary PVC 600 V #20
Leads Secondary PVC 300 V #16
Dimensions in inches: